PTFE Absolute rated membrane cartridges are highly retentive hydrophobic membrane filters. The PTFE membrane Cartridge in an all-propylene construction provides excellent chemical compatibility and superior flow per surface area as compared to other membrane cartridges. Are 100 % integrity tested with good particle removal efficiency at 0.1 & 0.2 microns.
Diameter: Inner Dia for standard size : 27 to 28 mm & Outer Dia : 70 mm
Automation Grade: Manual
I Deal In: New Only
Country of Origin: Made in India
Open Pleat cartridges are manufactured from a durable PP media. They are resistant to bacterial attacks and compatible with a wide range of chemicals. The porosity of the media provides high flow rates and dirt holding capacity, while maintaining extremely low pressure drops. Nominal ratings are 1,5,10 microns. Is suitable for municipal, well, swimming pool, residential, commercial and industrial applications. Additional Information:
SS Filters stainless steel vent Housing is constructed of SS304 /SS316/ SS316L stainless steel material for high purityapplications to allow venting of large & small tanks. The housingis typically used in the food & Beverage industries. The housingcomes in 10" to 40" sizes to meet the needs of your application.The housing is a clean & easy way to provide filtered air intotanks as well as allow gases to flow out. The housing can supportDouble Open End (DOE) or code-7 type filter cartridges. Thedesign of the housing provides for a positive seal with the filtersthereby preventing fluid by pass. Additional Information:
SS Filters Pvt Ltd coalescing filters are designed for compressed air, natural gas, refrigeration, CNG/ NGV (Compressed Natural Gas/ Natural Gas Vehicles) and air/ oil filter applications
Coalescing is the separation of liquid aerosols and droplets from a gas. Using a coalescer filter element installed in a housing, the wet gas sample passes through the element inside to outside.
Our coalescing filters are constructed of three layers.The inner layer acts as a prefilter. Middle layer is the borosilicate microglass- coalescing media of the filter and the third layer is the drainage layer.
Usage/Application: HPLC, Particulate & microbiological filtration of liquids
Material: Stainless Steel
Size: 47 mm
Features: All wetted parts are made from SS-316, Is more economical in long run than glass filter holder
Filtration Area: 13.5 cm2
Stainless steel FLOWFILT vacuum filter holder is made byargon arc welding process from stainless steel 316 grade. SSvacuum filter unit has an edge over glass unit in that it cannot bebroken. Also, because of stainless steel construction, it is easierto handle and has a longer life. Additional Information:
Vacuum Filters or exhaust filters are the filters for all vacuum pump ensures positive protection of all types of pumps invacuum service by preventing all foreign matter from being drawn into the pump. The vacuum filters are also designed to high more..
Features: Sintered and even glass support for membrane filter.
47mm glass filter holders which aretotally manufactured in Borosil glass. These lab glass filtration assemblies are designed for HPLC, particulate & microbiological contamination filtration. Additional Information: